Radial J+4 立体声前置放大器DI直插盒批发零售 隔离变压器 消除接地回路的噪声DI直插盒 吉他DI盒 Radial DI直插盒
这就是声海创新带给大家“Radial J+4 Stereo Line Driver”的介绍。如果想了解更多产品价格可以点击查看产品请点击全部商品分类. 承接多功能厅、会议室、报告厅、歌舞厅、体育场馆、剧场、礼堂、酒吧、酒店、公共广播、舞台、教室、多功能厅,以及KTV,家庭卡拉OK一切商业用途音视频灯光音响扩声系统工程。提供方案设计、安装、调试等服务。为客户量身定制具有较强现实适用性的系统解决方案,欢迎您来电咨询!了解更多品牌产品请,致电咨询我们客服更优惠,欢迎您来电咨询!
24小时服务热线:18618339665,13146744100 , 13141244200
QQ: 2899296168 , 2782522719 , 2734604569 , 2752684760
声海创新--经销-正品保证! www.yphbuy.com
J+4 立体声前置放大器DI直插盒
应用特点
u 内置带立体声前置放大器
u 为非平衡式低辒出电平设备而设计
u 平衡+4 dB 辒出,电平可调
u 带耳机监听,音量可调
u 100%分布式优选的精密元器件
u 提高低辒出乐器和音乐播放器的增益
u 内置隔离发压器消除接地回路引起的噪音
u 即插即用,易于操作,多种接口
u 独特书本式设计,保护控制旋钮丌叐外界撞击的伤害
u 军用级 14 规格钢材焊接制,使电路板丌会収生扭转
u 底部防滑垫处理,提供物理机械隔离和电气绝缘
技术参数
u 设备类型:无源、带隔离发压器
u 设备类型:有源-10dB - +4dB 转换放大器、带隔离发压器
u 通道数量:立体声
u 频率响应:20Hz ~ 20KHz (± 2dB)
u 劢态范围:102dB
u 最大辒入:+17dBu @ 1kHz, 1% THD+N
u 总谐波失真:0.004% @ 1kHz, +10dBu 辒出
u 相位偏差:0.5° @ 100Hz; 4° @ 20Hz
u 辒入阻抗:10KΩ 非平衡
u 辒出阻抗:1.6KΩ 平衡
u 高通滤波器:-3dB @ 100Hz (12dB.Oct.)
u 电源:+15VDC/400mA
u 尺寸:84 x 127 x 48mm
u 重量:870 克
J+4 Stereo Line Driver
Balanced -10dB to +4dB Signal Driver
The J+4? is a stereo interface designed to accept unbalanced low output devices such as instruments, computers or mobile devices and boost their signal to a balanced +4dB level for connection to professional audio recording and playback equipment.
Stereo preamp boost signals to +4dB balanced line level
Increases gain for low output instruments & music players
Transformer isolated to eliminate noise caused by ground loops
Multiple input connector options to interface with any device
Boost & balance any stereo signal
The J+4 allows you to boost nearly any stereo signal up to a +4dB balanced line level output, which can be sent over long distances without signal loss and connected directly to pro audio equipment such as mixers or recording interfaces. Multiple input connectors are available for integration with a variety of devices, including a stacked set of ?" jacks for DJ mixers or keyboards, RCAs for CD players and a mini 3.5mm jack for smartphones and tablets. The J+4 delivers exceptional sonic performance, and is able to provide clean gain and eliminate noise by combining the advantages of active signal buffering with transformer isolation.
J+4 Specifications
The Radial J+4 is a stereo preamplifier designed to boost unbalanced instruments and consumer level signals and bring them up to a professional +4dB balanced line level. Careful attention has been paid to delivering quality audio while incorporating transformer isolation for added noise suppression. The J+4 delivers a performance that is as good or better than devices costing many times more.
Specifications
Block Diagram
Graphs
Specifications
Audio circuit type: Active -10dB ~ +4dB line converter, transformer isolated
Number of channels: 2
Frequency response: 20Hz ~ 20KHz (± 2dB)
Dynamic range: 102dB
Total harmonic distortion: 0.004% @ 1kHz, +10dBu output
Phase Deviation: 0.5° @ 100Hz; 4° @ 20Hz
Input Impedance: 10k Ohms, unbalanced
Output Impedance: 1.6k Ohms, balanced
Maximum Input: +17dBu @ 1kHz, 1% THD+N
Maximum Output: +15dBu @ 1kHz, 1% THD+N
Features
Ground lift, HPF, Level Control
Input Connectors: 1/4", RCA, 3.5mm
Output Connectors: XLR
General
Construction: 14-gauge steel
Size (L x W x D): 84 x 127 x 48mm (3.3" x 5.0" x 2")
Weight: 0.70 kg (1.55 lbs)
Shipping size (L x W x D): 102 x 76 x 165mm (4" x 3" x 6.5")
Shipping weight: .87 kg (1.92 lbs)
Power: +15VDC/400mA adapter Included
Conditions: For use in dry locations only between 5°C and 40°C
Warranty: Radial 3-year, transferable