Radial Exo-Pod 一进十出广播级无源音频信号分配器批发零售 隔离变压器 消除接地回路的噪声DI直插盒 吉他DI盒 Radial DI直插盒

 

这就是声海创新带给大家“Radial Exo-Pod Broadcast Splitter”的介绍。如果想了解更多产品价格可以点击查看产品请点击全部商品分类. 承接多功能厅、会议室、报告厅、歌舞厅、体育场馆、剧场、礼堂、酒吧、酒店、公共广播、舞台、教室、多功能厅，以及KTV，家庭卡拉OK一切商业用途音视频灯光音响扩声系统工程。提供方案设计、安装、调试等服务。为客户量身定制具有较强现实适用性的系统解决方案，欢迎您来电咨询！了解更多品牌产品请，致电咨询我们客服更优惠，欢迎您来电咨询！  

24小时服务热线：18618339665，13146744100 , 13141244200

QQ: 2899296168 , 2782522719 , 2734604569 , 2752684760

声海创新--经销-正品保证! www.yphbuy.com

 

 

Exo-Pod 一进十出广播级无源音频信号分配器

应用特点

u 无源式音频线路信号分配器设计

u 10 个专业设备和 4 个非专业设备接口

u 可设置和修改信号通道的信号电平控制

u 可扩展的输入接口

u 使用 mPress 设备可将系统扩展到上百个独立通道

u 带独立的接地开关，消除由于电位差所引起的噪音

u 军用级别的 14 号钢钢材结构，可有效消除外界的电磁干扰

u 军用级 14 规格钢材焊接制，使电路板不会发生扭转

技术参数

u 频率响应：20Hz-20kHz±1dB

u 总谐波失真：0.001%

u 动态范围：>136dB/>100dB

u 输入阻抗：350Ω

u 共模抑制比：63dB

u 输入电平：>+26dBu

u 输出阻抗：1KΩ（平衡专业）

u 输出阻抗：4.6KΩ（非专业非平衡）

u 等效输入噪声：-108dBu/-84dBu

u 本地噪声：-111dBu

u 互调失真：0.006%

u 尺寸：298.45mmx127mmx57.15mm

u 重量：1.63Kg

 

Exo-Pod Broadcast Splitter

Passive Line-Level Splitter

The Exo-Pod? is a passive broadcast splitter than can take a balanced line output from a mixing console and distribute the signal to up to 14 recording devices. It can also be used in conjunction with the Radial mPress master press box to create a modular solution that provides hundreds of individual press feeds.

Passive splitter with 14 transformer-isolated outputs

Set & forget trim control to adjust output levels

Balanced line-level XLR input can handle up to +24dB

Daisy-chain multiple Exo-Pods for large events

Expandable noise-free splitting

The Exo-Pod take a line-level XLR input and splits it cleanly to ten XLR outputs and four 3.5mm TRS jacks for connection to video cameras, hand-held recorders, tablets or other media systems. A variable input trim allows the broadcast technician to reduce the global output level locally for convenience, and all of the outputs are transformer isolated to eliminate hum and buzz that is often encountered due to ground loops. The XLR outputs are supplemented with individual ground lift switches to further abate noise, and an XLR thru connector allows multiple Exo-Pods to be linked together to provide an expandable solution to handle events of any size.

Exo-Pod Specifications

The Exo-Pod is a passive modular splitter for professional audio distribution to a large number of mic or line level recorders. Exo-Pods can be used with the mPress modular press box or as a standalone device, with the ability to daisy-chain multiple units together for even more outputs. Each Exo-Pod features ten XLR outputs with ground lift switches, and four 3.5mm stereo TRS jacks; all of these outputs are transformer isolated. A trim control at the input allows you to adjust the level. The Exo-Pod is built to last, with a 14-gauge steel enclosure and a steel handle that protects the XLR input, loop-thru output, and trim control. With its flat frequency response and noise-eliminating isolation transformers and ground lifts, the Exo-Pod will ensure that your audio is distributed cleanly.

Specifications

Block Diagram

Graphs

Specifications

Audio circuit type: Passive

Number of channels: 14 outputs

Frequency response: <20Hz to >20kHz ±1dB

Dynamic range: >136dB / >100dB

Gain: -3.5dB / -18dBu

Clip Level: >+26dBu

Total harmonic distortion: 0.001%

Intermodulation Distortion: 0.006%

Phase Deviation: -5/+25°

Input Impedance: 350 Ω

Output Impedance: XLR: 1000 Ω | 3.5mm: 4600 Ω

Common Mode Rejection Ratio: 63dB

Equivalent Input Noise: -108dBu/-84dBu

Noise: XLR: -111dBu | 3.5mm: -86dBu

Features

Ground lift, Level Control

Input Connectors: XLR

Output Connectors: XLR, 3.5mm

General

Construction: 14-gauge steel chassis & outer shell

Size (L x W x D): L:11.75"" x W:5" H:2.25" (298.45mm x 127mm x 57.15mm)

Weight: 3.6lb

Shipping size (L x W x D): L:13.37" x W:5.5" H:3.25" (571.5mm x 260.35mm x 114.3mm)

Shipping weight: 4lb

Power: Passive, no power required

Conditions: For use in dry locations only between 5°C and 40°C

Warranty: Radial 3-year, transferable