Radial ProMS2 单通道一进三出高性能无源话筒分配器批发零售 隔离变压器 消除接地回路的噪声DI直插盒 吉他DI盒 Radial DI直插盒
这就是声海创新带给大家“Radial ProMS2 Passive Microphone Splitter”的介绍。如果想了解更多产品价格可以点击查看产品请点击全部商品分类. 承接多功能厅、会议室、报告厅、歌舞厅、体育场馆、剧场、礼堂、酒吧、酒店、公共广播、舞台、教室、多功能厅,以及KTV,家庭卡拉OK一切商业用途音视频灯光音响扩声系统工程。提供方案设计、安装、调试等服务。为客户量身定制具有较强现实适用性的系统解决方案,欢迎您来电咨询!了解更多品牌产品请,致电咨询我们客服更优惠,欢迎您来电咨询!
24小时服务热线:18618339665,13146744100 , 13141244200
QQ: 2899296168 , 2782522719 , 2734604569 , 2752684760
声海创新--经销-正品保证! www.yphbuy.com
ProMS2 单通道一进三出高性能无源话筒分配器
应用特点
u 2 或 3 路可选的设计以满足使用的灵活性
u 配备了 Jensen 变压器以提供最佳声音
u 采用高级镍金属层压核心变压器,用于异常的低谐波失真
u 100%无衰减,隔离变压器以排除接地环路的交流声
u 话筒或线路电平信号工作
u 话筒可分配到 2 或 3 台调音台
u 在实况演出中提供录音馈送
u 即插即用,简单易用
u 完全无源!
u 独特书本式设计,保护控制旋钮不受外界撞击的伤害
u 军用级 14 规格钢材焊接制,使电路板不会发生扭转
u 底部防滑垫处理,提供物理机械隔离和电气绝缘
技术参数
u 频率响应:20Hz?20KHz(+0dB/-1dB)
u 增益:-0.5dB
u 动态范围:>140dB
u 总谐波失真:0.001%
u 噪声本底:-140dB
u 最大输入:+26dBu
u 相位偏差 1°@20Hz 的
u 互调失真:0.003%
u 共模抑制比:-115dB 在 60Hz
u 衰减:-30dB
u 输入阻抗:2.5K Ω,不平衡
u 输出阻抗:140K Ω,平衡
u 尺寸: 84x127x48(mm)
u 重量:0.7Kg
ProMS2 Passive Microphone Splitter
Passive 2-way Microphone Splitter
The ProMS2? is a balanced mic-level splitter designed to send a signal to multiple destinations simultaneously on stage, with one transformer-isolated output and two direct outputs.
Send one microphone signal to three destinations simultaneously
Eclipse transformer for clean & transparent audio
Eliminates hum and buzz caused by ground loops
Single isolated output provides optimal noise rejection
Portable mic splitting for stage use
The ProMS2 is a mic splitter designed to split a single source to multiple destinations simultaneously without signal degradation or noise. A high quality Eclipse transformer inside provides galvanic isolation to eliminate hum and buzz from ground loops, while delivering a wide frequency response and low distortion. Ground lifts on the outputs help further reduce noise, while an input pad allows line-level sources to be connected as well. The ProMS2 can be rack mounted for touring and installation purposes, with up to eight fitting in the Radial J-Rak.
ProMS2 Specifications
Specifications
Block Diagram
Graphs
Specifications
Audio circuit type: Passive
Transformer: Eclipse ET-MS10
Frequency response: 20Hz ~ 20KHz (+0dB -1dB)
Dynamic range: >140dB
Gain: -0.5dB
Total harmonic distortion: 0.001%
Intermodulation Distortion: 0.003%
Phase Deviation: 1° @ 20Hz
Input Impedance: 2.5K Ohms, unbalanced
Output Impedance: 140K Ohms, balanced
Common Mode Rejection Ratio: -115dB at 60Hz
Noise: -140dB
Maximum Input: +26dBu
Features
Input pad
Input Connectors: XLR-F
Output Connectors: XLR-M
General
Construction: 14-gauge steel chassis & outer shell
Size (L x W x D): 5.0" x x
Weight: 1.55lb (0.7kg)
Shipping weight: 1.92lb (0.87kg)
Power: Passive, no power required
Conditions: For use in dry locations only between 5°C and 40°C
Warranty: Radial 3-year, transferable